Phone number
Terms
Carbide tipped, submicron grade for milling cast, ductile and malleable iron as well as non-ferrous materials.
  • Four straight flutes, right hand cut, non-center cutting.
  • Machine horsepower must be adequate for this high capacity end mill.
  • Sharp edge for smoother finish.
  • Weldon shank is standard.
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1 

Item #

Cutting Ø "D" (Inch)

Cutting Ø "D" (mm)

Dec. Equiv. (Inch)

Overall Length "A" (Inch)

Overall Length "A" (mm)

Length Of Carbide "B" (Inch)

Length Of Carbide "B" (mm)

Shank Diameter "C" (Inch)

Shank Diameter "C" (mm)

32002500 N/A 1/4 N/A 6.35 N/A 0.2500 N/A 2 1/2 N/A 64 N/A 1/2 N/A 13 N/A 3/8 N/A 9.525
32003125 N/A 5/16 N/A 7.938 N/A 0.3125 N/A 2 1/2 N/A 64 N/A 5/8 N/A 16 N/A 3/8 N/A 9.525
32003750 N/A 3/8 N/A 9.525 N/A 0.3750 N/A 2 1/2 N/A 64 N/A 5/8 N/A 16 N/A 3/8 N/A 9.525
32004375 N/A 7/16 N/A 11.113 N/A 0.4375 N/A 2 11/16 N/A 68 N/A 1 N/A 25 N/A 3/8 N/A 9.525
32005000 N/A 1/2 N/A 12.7 N/A 0.5000 N/A 3 1/4 N/A 83 N/A 1 N/A 25 N/A 1/2 N/A 12.7
32005625 N/A 9/16 N/A 14.288 N/A 0.5625 N/A 3 3/8 N/A 86 N/A 1 N/A 25 N/A 1/2 N/A 12.7
32006250 N/A 5/8 N/A 15.875 N/A 0.6250 N/A 3 3/8 N/A 86 N/A 1 N/A 25 N/A 1/2 N/A 12.7
32007500 N/A 3/4 N/A 19.05 N/A 0.7500 N/A 3 5/8 N/A 92 N/A 1 N/A 25 N/A 5/8 N/A 15.875
32008750 N/A 7/8 N/A 22.225 N/A 0.8750 N/A 4 N/A 102 N/A 1 1/4 N/A 32 N/A 5/8 N/A 15.875
32010000 N/A 1 N/A 25.4 N/A 1.0000 N/A 4 N/A 102 N/A 1 1/4 N/A 32 N/A 7/8 N/A 22.225
32011250 N/A 1 1/8 N/A 28.575 N/A 1.1250 N/A 4 1/4 N/A 108 N/A 1 1/4 N/A 32 N/A 1 N/A 25.4
32012500 N/A 1 1/4 N/A 31.75 N/A 1.2500 N/A 4 1/4 N/A 108 N/A 1 1/4 N/A 32 N/A 1 N/A 25.4
1 - 12 of 12 | Results Per Page | View | Unit of Measure
1