Phone number
Terms
Submicron carbide grade provides maximum wear resistance when cutting steels, stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.
  • Coolant feeding S.C. Kooltwist high performance drills yield higher penetration compared to non-coolant fed high performance drills when drilling deep holes.
  • 140° double split point provides excellent chip flow over the entire cutting edge.
  • High helix, right hand cut.
  • Tool life is increased and peck drilling can be eliminated when used with high pressure coolant.
  • Larger sizes available see Style 292.
  • Coating adds lubricity, enhances wear resistance and prevents edge build-up.
    TiN coating is recommended for long chipping, low-carbon, ductile and gummy materials.
    TiAlN coating is recommended for short chipping, abrasive and high temperature materials.
  • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
  • Some tool holders and stop screws with a single, central coolant hole may require a coolant groove be added to the shank end of the drill.
  • Shank Ø = Cutting Ø
1 - 25 of 146 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Item #

Cutting Ø "D" (Inch/Wire)

Cutting Ø "D" (mm)

Dec. Equiv. (Inch)

Overall Length "A" (Inch)

Overall Length "A" (mm)

Flute Length "B" (Inch)

Flute Length "B" (mm)

Finish

29301250 N/A 1/8 N/A 3.175 N/A 0.1250 N/A 3 11/32 N/A 85 N/A 1 1/8 N/A 29 N/A TiN TiAlN
29301260 N/A N/A 3.2 N/A 0.1260 N/A 3 11/32 N/A 85 N/A 1 1/8 N/A 29 N/A TiN TiAlN
29301285 N/A 30 N/A 3.264 N/A 0.1285 N/A 3 11/32 N/A 85 N/A 1 1/8 N/A 29 N/A TiN TiAlN
29301299 N/A N/A 3.3 N/A 0.1299 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301339 N/A N/A 3.4 N/A 0.1339 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301360 N/A 29 N/A 3.454 N/A 0.1360 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301378 N/A N/A 3.5 N/A 0.1378 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301405 N/A 28 N/A 3.569 N/A 0.1405 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301406 N/A 9/64 N/A 3.572 N/A 0.1406 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301417 N/A N/A 3.6 N/A 0.1417 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301440 N/A 27 N/A 3.658 N/A 0.1440 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301470 N/A 26 N/A 3.734 N/A 0.1470 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301495 N/A 25 N/A 3.797 N/A 0.1495 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301520 N/A 24 N/A 3.861 N/A 0.1520 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301540 N/A 23 N/A 9.912 N/A 0.1540 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301562 N/A 5/32 N/A 3.967 N/A 0.1562 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301570 N/A 22 N/A 3.988 N/A 0.1570 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301575 N/A N/A 4 N/A 0.1575 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301590 N/A 21 N/A 4.039 N/A 0.1590 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301610 N/A 20 N/A 4.089 N/A 0.1610 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301614 N/A N/A 4.1 N/A 0.1614 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301624 N/A N/A 4.125 N/A 0.1624 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301654 N/A N/A 4.2 N/A 0.1654 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301660 N/A 19 N/A 4.216 N/A 0.1660 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
29301673 N/A N/A 4.25 N/A 0.1673 N/A 3 5/8 N/A 92 N/A 1 13/32 N/A 36 N/A TiN TiAlN
1 - 25 of 146 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »