Phone number
Terms
Submicron carbide grade provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.
  • Stub length and 140° double split point eliminates spot drilling and reaming in most instances.
  • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard high speed steel.
  • Right hand spiral ,right hand cut.
  • See style 113 for steel cutting carbide grade.
  • Coating adds lubricity, enhances wear resistance and prevents edge build-up. TiAlN coating is recommended for short chipping, abrasive and high temperature materials. TiN coating is recommended for long chipping, low-carbon, ductile and gummy materials.
  • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
  • Shank Ø = Cutting Ø
1 - 25 of 183 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Item #

Cutting Ø "D" (Inch/Wire)

Cutting Ø "D" (mm)

Dec. Equiv. (Inch)

Overall Length "A" (Inch)

Overall Length "A" (mm)

Flute Length "B" (Inch)

Flute Length "B" (mm)

Finish

11400980 N/A 40 N/A 2.489 N/A 0.0980 N/A 1 15/16 N/A 49 N/A 9/16 N/A 14 N/A TiN TiAlN
11400984 N/A N/A 2.5 N/A 0.0984 N/A 1 15/16 N/A 49 N/A 9/16 N/A 14 N/A TiN TiAlN
11400995 N/A 39 N/A 2.527 N/A 0.0995 N/A 1 15/16 N/A 49 N/A 9/16 N/A 14 N/A TiN TiAlN
11401015 N/A 38 N/A 2.578 N/A 0.1015 N/A 1 15/16 N/A 49 N/A 9/16 N/A 14 N/A TiN TiAlN
11401040 N/A 37 N/A 2.642 N/A 0.1040 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401065 N/A 36 N/A 2.705 N/A 0.1065 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401094 N/A 7/64 N/A 2.779 N/A 0.1094 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401100 N/A 35 N/A 2.794 N/A 0.1100 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401110 N/A 34 N/A 2.819 N/A 0.1110 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401130 N/A 33 N/A 2.87 N/A 0.1130 N/A 2 N/A 51 N/A 5/8 N/A 16 N/A TiN TiAlN
11401160 N/A 32 N/A 2.946 N/A 0.1160 N/A 2 2/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401181 N/A N/A 3 N/A 0.1181 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401200 N/A 31 N/A 3.048 N/A 0.1200 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401250 N/A 1/8 N/A 3.175 N/A 0.1250 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401260 N/A N/A 3.2 N/A 0.1260 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401285 N/A 30 N/A 3.264 N/A 0.1285 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401299 N/A N/A 3.3 N/A 0.1299 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401339 N/A N/A 3.4 N/A 0.1339 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401360 N/A 29 N/A 3.454 N/A 0.1360 N/A 2 1/16 N/A 52 N/A 11/16 N/A 17 N/A TiN TiAlN
11401378 N/A N/A 3.5 N/A 0.1378 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
11401405 N/A 28 N/A 3.569 N/A 0.1405 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
11401406 N/A 9/64 N/A 3.571 N/A 0.1406 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
11401417 N/A N/A 3.6 N/A 0.1417 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
11401440 N/A 27 N/A 3.658 N/A 0.1440 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
11401470 N/A 26 N/A 3.734 N/A 0.1470 N/A 2 5/32 N/A 55 N/A 25/32 N/A 20 N/A TiN TiAlN
1 - 25 of 183 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »