Phone number
Terms
Submicron carbide grade and Tail coating provides maximum wear resistance when cutting high carbon, high alloy and stainless steels, titanium, high temperature alloys, aluminum, bronze, cast and ductile iron.
  • Jobber length and 140° double split point eliminate spot drilling and reaming in most instances.
  • Heavy web, high helix flute clears chips effectively allowing up to five times greater penetration rate vs. standard high speed steel.
  • Right hand spiral, right hand cut.
  • See style 116 for steel cutting carbide grade.
  • TiAlN coating adds lubricity, enhances wear resistance, prevent sedge build-up, and is recommended for short chipping, abrasive and high temperature materials.
  • Allow 1.5 x Ø of flute for chip exit up to 7/16” (11.1mm) and 1 x Ø over 7/16”.
  • Shank Ø = Cutting Ø
1 - 25 of 80 | Results Per Page | View | Unit of Measure
1 2 3 4 

Item #

Cutting Ø "D" (Inch/Wire)

Cutting Ø "D" (mm)

Dec. Equiv. (Inch)

Overall Length "A" (Inch)

Overall Length "A" (mm)

Flute Length "B" (Inch)

Flute Length "B" (mm)

Finish

N/A 1/8 N/A 3.175 N/A 0.1250 N/A 2 1/4 N/A 57 N/A 2 1/4 N/A 22 N/A TiAlN
N/A N/A 3.5 N/A 0.1378 N/A 2 11/32 N/A 60 N/A 2 11/32 N/A 25 N/A TiAlN
N/A 9/64 N/A 3.572 N/A 0.1406 N/A 2 11/32 N/A 60 N/A 2 3/8 N/A 25 N/A TiAlN
N/A 5/32 N/A 3.967 N/A 0.1562 N/A 2 15/32 N/A 63 N/A 2 15/32 N/A 29 N/A TiAlN
N/A N/A 4 N/A 0.1575 N/A 2 15/32 N/A 63 N/A 2 15/32 N/A 29 N/A TiAlN
N/A 11/64 N/A 4.366 N/A 0.1719 N/A 2 15/32 N/A 63 N/A 2 5/8 N/A 29 N/A TiAlN
N/A N/A 4.5 N/A 0.1772 N/A 2 15/32 N/A 63 N/A 2 5/8 N/A 29 N/A TiAlN
N/A 3/16 N/A 4.763 N/A 0.1875 N/A 2 11/16 N/A 68 N/A 2 11/16 N/A 33 N/A TiAlN
N/A N/A 5 N/A 0.1969 N/A 2 3/4 N/A 70 N/A 2 3/4 N/A 35 N/A TiAlN
N/A 7 N/A 5.105 N/A 0.2010 N/A 2 13/16 N/A 71 N/A 2 13/16 N/A 37 N/A TiAlN
N/A 13/64 N/A 4.159 N/A 0.2031 N/A 2 13/16 N/A 71 N/A 2 13/16 N/A 37 N/A TiAlN
N/A N/A 5.5 N/A 0.2165 N/A 2 15/16 N/A 75 N/A 2 15/16 N/A 39 N/A TiAlN
N/A 7/32 N/A 5.558 N/A 0.2188 N/A 2 15/16 N/A 75 N/A 2 15/16 N/A 39 N/A TiAlN
N/A 15/64 N/A 5.954 N/A 0.2344 N/A 3 N/A 76 N/A 3 N/A 41 N/A TiAlN
N/A N/A 6 N/A 0.2362 N/A 3 N/A 76 N/A 3 N/A 41 N/A TiAlN
N/A D N/A 6.248 N/A 0.2460 N/A 3 3/16 N/A 81 N/A 3 3/16 N/A 41 N/A TiAlN
N/A 1/4 N/A 6.35 N/A 0.2500 N/A 3 3/16 N/A 81 N/A 3 3/16 N/A 41 N/A TiAlN
N/A N/A 6.5 N/A 0.2559 N/A 3 3/16 N/A 81 N/A 3 3/16 N/A 41 N/A TiAlN
N/A F N/A 6.528 N/A 0.2570 N/A 3 3/16 N/A 81 N/A 3 3/16 N/A 41 N/A TiAlN
N/A 17/64 N/A 6.746 N/A 0.2656 N/A 3 1/4 N/A 83 N/A 3 1/4 N/A 44 N/A TiAlN
N/A I N/A 6.909 N/A 0.2720 N/A 3 1/4 N/A 83 N/A 3 1/4 N/A 44 N/A TiAlN
N/A N/A 7 N/A 0.2756 N/A 3 1/4 N/A 83 N/A 3 1/4 N/A 44 N/A TiAlN
N/A 9/32 N/A 7.142 N/A 0.2812 N/A 3 7/16 N/A 87 N/A 3 7/16 N/A 45 N/A TiAlN
N/A N/A 7.5 N/A 0.2953 N/A 3 7/16 N/A 87 N/A 3 7/16 N/A 45 N/A TiAlN
N/A 19/64 N/A 7.541 N/A 0.2969 N/A 3 9/16 N/A 90 N/A 3 9/16 N/A 48 N/A TiAlN
1 - 25 of 80 | Results Per Page | View | Unit of Measure
1 2 3 4