Phone number
Terms
  • Double end, Stub length, 30° right hand spiral, right hand cut.
  • Submicron carbide grade for increased wear resistance and toughness.
  • Lower cost per tool compared to single end tools.
  • Increased tool rigidity with stub length.
  • Two flute construction for maximum chip evacuation.
  • Typical applications in Aluminum, Non Ferrous and Non Metallic.
  • Special corner radius or chamfers quoted upon request.
51 - 60 of 60 | Results Per Page | View | Unit of Measure
1 2 3 

Item #

Coating

Cutting Ø "D"

Decimal Equivalent

Overall Length "A"

Length Of Cut "B"

Shank Diameter "C"

36204375C N/A TiCN N/A 7/16 in11.113 mm N/A .4375 in N/A 2 3/4 in70 mm N/A 9/16 in14 mm N/A 7/16 in11.113 mm
36205000 N/A Uncoating N/A 1/2 in12.7 mm N/A .5000 in N/A 3 in76 mm N/A 5/8 in16 mm N/A 1/2 in12.7 mm
36205000A N/A AlTiN N/A 1/2 in12.7 mm N/A .5000 in N/A 3 in76 mm N/A 5/8 in16 mm N/A 1/2 in12.7 mm
36205000C N/A TiCN N/A 1/2 in12.7 mm N/A .5000 in N/A 3 in76 mm N/A 5/8 in16 mm N/A 1/2 in12.7 mm
36206250 N/A Uncoating N/A 5/8 in15.875 mm N/A .6250 in N/A 4 in102 mm N/A 3/4 in19 mm N/A 5/8 in15.875 mm
36206250A N/A AlTiN N/A 5/8 in15.875 mm N/A .6250 in N/A 4 in102 mm N/A 3/4 in19 mm N/A 5/8 in15.875 mm
36206250C N/A TiCN N/A 5/8 in15.875 mm N/A .6250 in N/A 4 in102 mm N/A 3/4 in19 mm N/A 5/8 in15.875 mm
36207500 N/A Uncoating N/A 3/4 in19.05 mm N/A .7500 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 3/4 in19.05 mm
36207500A N/A AlTiN N/A 3/4 in19.05 mm N/A .7500 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 3/4 in19.05 mm
36207500C N/A TiCN N/A 3/4 in19.05 mm N/A .7500 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 3/4 in19.05 mm
51 - 60 of 60 | Results Per Page | View | Unit of Measure
1 2 3