Phone number
Terms
  • Ball end, double end, standard length, 30° right hand spiral, right hand cut.
  • Submicron carbide grade for increased wear resistance and toughness.
  • Full radius ball for contour milling.
  • Excellent in a wide range of materials.
26 - 33 of 33 | Results Per Page | View | Unit of Measure
1 2 

Item #

Coating

Cutting Ø "D"

Decimal Equivalent

Overall Length "A"

Length Of Cut "B"

Shank Diameter "C"

Sort by
37803750A N/A AlTiN N/A 3/8 in9.525 mm N/A .3750 in N/A 3 1/2 in89 mm N/A 3/4 in19 mm N/A 3/8 in9.525 mm
37803750C N/A TiCN N/A 3/8 in9.525 mm N/A .3750 in N/A 3 1/2 in89 mm N/A 3/4 in19 mm N/A 3/8 in9.525 mm
37804375 N/A Uncoated N/A 7/16 in11.113 mm N/A .4375 in N/A 4 in102 mm N/A 7/8 in22 mm N/A 1/2 in12.7 mm
37804375A N/A AlTiN N/A 7/16 in11.113 mm N/A .4375 in N/A 4 in102 mm N/A 7/8 in22 mm N/A 1/2 in12.7 mm
37804375C N/A TiCN N/A 7/16 in11.113 mm N/A .4375 in N/A 4 in102 mm N/A 7/8 in22 mm N/A 1/2 in12.7 mm
37805000 N/A Uncoated N/A 1/2 in12.7 mm N/A .5000 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 1/2 in12.7 mm
37805000A N/A AlTiN N/A 1/2 in12.7 mm N/A .5000 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 1/2 in12.7 mm
37805000C N/A TiCN N/A 1/2 in12.7 mm N/A .5000 in N/A 4 in102 mm N/A 1 in25.4 mm N/A 1/2 in12.7 mm
26 - 33 of 33 | Results Per Page | View | Unit of Measure
1 2